2-Year Warranty with Pay with Ease
Your Ranger's stock rear turn signals tell the driver behind you your next steering action, but they illuminate in a slow go while taking a moment to turn on and off. With the AUXITO 14K Series 3157 LED rear turn signal bulbs, you can immediately update your 1998-2011 Ford Ranger's appeal with the instant on-off blinking of modern LEDs. These premium LED replacement units are 300% brighter than the original l halogen lights while producing a clearer light for an improved exterior appearance and emit maximum turn signal output for any situation.
High light output
Each 3157 LED turn signal light bulb has 14 pieces 3030 SMD chipsets with high performance and projector lens design with projector lens design, providing 360 degree full angle illumination for your Ranger. 300% brighter than halogen turn signal lights, assuring you will be seen more clearly from further away but it will not blind other drivers.
Good heat dissipation
The 3157 led turn signal bulb chips of the 14K series are reasonably distributed, with enough clearance for chip heat dissipation. As well as the rear turn signal bulb is designed with a solid alloy body and aluminum circuit board to ensure better heat dissipation and light transfer efficiency.
Longer lifespan
The led turn signal light bulb with built-in stable constant current IC driver, no radio signal interference. Over 35,000 hours of lifespan for sure
Plug and play easy installation
No polarity design, compatible with both standard and CK socket. Perfer fit your 1998-2011 Ford Ranger's rear turn signal light socket.
Power: 8.4W/bulb
Voltage: DC9V-16V
LED Type: 14pcs 3030SMD
Color: Brilliant Red/Amber yellow
Socket type: Compatible with both CK and US standard sockets
Vehicle: 1998-2011 Ford Ranger
Application: Rear turn signals
Bulb Size: 3157/3156
Series: 14K
3157 102H - View More
3157 54H - View More
Overview One of the critical advantages of this Q16 series 9007 for upgrading the 1998-2011 Ford Ranger headlamp is that the optical module o...
View full details
For 1993-2011 Ford Ranger 1999-2016 Ford F-250/F-350/F-450/F-550 Super Duty 2001-2005 Ford Explorer Sport Trac 1995-2003 Mazda B-Series (Does not...
View full details
For 1993-2011 Ford Ranger For 1999-2016 Ford F-250/ SD F-350/ SD F-450/ SD F-550 SD For 1995-2003 Mazda B2300/ B2500/ B3000/ B4000 Tips: It is wor...
View full details
Overview The stock fog lights on the 2005-2007 Ranger aren't that impressive, especially if you have cool white LED headlights. Give your Ran...
View full details
Overview Improve your safety while adding a more modern look to your vehicle by replacing your 2001-2011 Ford Ranger incandescent fog lights ...
View full detailsI was very impressed! My Can-Am uses 4 9005 headlights. 2 for the low beam & 2 for the high beam. Low’s are a noticeable improvement BUT when on high it’s almost like driving in daylight.
The LED bulbs are plug and play, work awesome my visibility is so much better and both the high and low beams work the way they should not like other bulbs that only worked on low beam.
The AUXITO J503 Jump Starter is a much needed complement to any vehicles safety kit. As one of the few jump starters with both safety protections and boost capability it is an industry leader. Unmatched protection for your vehicle.
Got this for my 2012 Wide glide,, to complete my LED conversions....
This bulb is the bomb,, & was easy to install,, plus did not mess with the elect. system ...
It is ''way'' bright,, & figure with this & the rest of the LED's now on the bike,, that the elect. system now ,, is pulling over 50% less,, & also way less draw on the Batt. ect.. ect..,, plus 50% less draw,, when starting the Bike,, as the lights are always on with the ignition ect.
Definite no brainer,, & you want to make sure that you keep the OEM headlight reflector cone in place,, when putting this on a later model Harley,, like the Dyna's ect.
Highly recommend & ''thank you'' !!
Ian
The length of time it took to receive the order seemed excessive. I was told the item was out of stock,but agreed to wait because I like the product. When notified the order was ready to ship, I was told you didn’t know what method to use for shipping. That seemed like a poor excuse since it looked like the order came
directly from the manufacturer. In the end,the bulbs arrived and were installed just in time for a very long road trip. Thank you for a good product.
