Overview

The rubber reveal molding along the top of your windshield takes constant sun, rain, and car-wash abuse. Once it cracks, shrinks, or lifts, water works its way under the glass edge and wind noise picks up at highway speed. This AUXITO molding replaces the upper trim on 2006-2011 Honda Civic sedans, molded to the original profile so it sits flush against the glass and the roofline.

Vehicle fitment & specifications

Windshield trim differs between body styles — the Civic Coupe uses a different part, 73150-SVA-A01. It can also vary within a model year, so please confirm before ordering: compare the OE number above against your owner's manual or the original trim on your vehicle. The vehicle check tool on this page and the part number we list are here to help you identify the right part — they're a reference, not a guarantee.

Features

OE-profile fit

Molded to the original reveal profile for the 2006-2011 Civic sedan, so it sits flush along the top edge of the glass with no gaps at the corners.

Automotive-grade rubber

Stays flexible through summer heat, winter cold, and repeated car washes, resisting the cracking and shrinking that make original moldings lift.

Seals out water and noise

A tight seal along the upper glass edge keeps rainwater out of the windshield channel and cuts the wind noise you hear at highway speed.

Restores the finished look

Replaces sun-faded, cracked, or missing trim so the windshield surround looks factory again.

What's in the box

• 1 × front upper windshield reveal molding trim

Installation notes

• Replacing this trim normally means removing the windshield. The molding is fitted along the glass edge, so in most cases this job goes together with a glass replacement. A professional auto glass technician is recommended.

• Clean the glass edge and roof flange of old adhesive and debris before fitting.

• Let the molding sit at room temperature first — cold rubber is stiff and kinks easily.

• After fitting, check that it sits flush along the full width with no lifted corners.

FAQ

Is this the upper molding or the side pieces?

This is the upper reveal molding for the front windshield. The left and right side moldings are separate parts and are not included.

Will this fit my Civic Coupe?

No. This molding is for the 4-door Sedan only. The 2006-2011 Civic Coupe uses a different part, 73150-SVA-A01.

Does it fit the Hybrid, GX, or Si?

Yes, as long as it's the 4-door Sedan. The DX, EX, EX-L, GX, LX, LX-S, MX (Hybrid), and Si sedans all use the same upper windshield reveal molding. Note that Si and EX-L sedans start in later model years — check your exact trim against the fitment table above.

Is this the same as the roof drip molding?

No. This is the upper windshield reveal molding that runs left to right along the top of the glass. The roof moldings that run down each side of the windshield toward the roof are separate parts, 73158-SNA-013 and 73168-SNA-013.

Can I install it myself?

The molding is fitted along the windshield edge, so replacement usually requires removing the glass. If your windshield isn't being replaced at the same time, have a professional auto glass installer do the job.

Does it come with clips or adhesive?

Only the molding is included. Reuse your original clips if they're intact, or order new ones if they're damaged.