Overview

A hood that won't stay open, pops when you lift it, or sits unevenly against the fenders usually points to one thing: worn hinges. This AUXITO hood hinge pair brings your 2012-2015 Honda Civic back to factory hood operation. Both hinges are stamped to the original dimensions and bolt pattern, so they mount straight to the factory points with basic hand tools — no drilling, cutting, or welding.

Vehicle fitment & specifications

Features

Bolt-on replacement

Built to the original hinge dimensions and bolt pattern, so it installs with basic hand tools. No drilling, cutting, or welding — no modifications required.

Heavy-duty steel

Stamped from high-strength steel that handles repeated open-close cycles and the constant weight of the hood, resisting the bending and metal fatigue that cause sag in the first place.

Corrosion-resistant finish

A black protective coating stands up to rain, road salt, and engine-bay heat, so the hinges keep moving freely instead of seizing up from rust.

Factory hood alignment

Matched to the original geometry, so your hood closes flush with even panel gaps. Correct alignment also takes the strain off the hood latch and helps keep wind noise out of the cabin.

Sold as a matched pair

Hinges wear at the same rate on both sides. Replacing both at once keeps hood movement balanced and saves you a second repair down the road.

What's in the box

• 1 × front hood hinge, left driver side

• 1 × front hood hinge, right passenger side

Mounting bolts are not included — reuse your factory hardware, or order new OEM bolts if yours are rusted or damaged.

Installation notes

• Support the hood first. A hood is heavy and goes badly unbalanced the moment one hinge is loose. Use a second pair of hands or a hood prop.

• Mark before you remove. Tape or marker around the old hinge footprint makes realignment much faster on reassembly.

• One side at a time. Leaving one hinge attached keeps the hood from shifting.

• Check alignment before you close. Torque the bolts to Honda's factory spec, then lower the hood slowly and confirm even gaps on both sides.

Professional installation is recommended if you're not comfortable working with hood hardware.

FAQ

How do I know if my hood hinges are bad?

The usual signs: the hood won't stay open, clicks or pops when you lift it, sits unevenly with the fenders, needs a slam to latch, or you can see rust and cracking around the pivot point.

Are the left and right hinges the same part?

No — they're mirror images. The left (driver) side is 60120TR0A00ZZ and the right (passenger) side is 60170TR0A00ZZ. This kit includes one of each.

Will this fit my Civic Si, Hybrid, or coupe?

Yes. This set fits both the Sedan and the Coupe across the 2012-2015 Civic line — Si (2.4L), Hybrid and Hybrid-L (1.5L), Natural Gas, Touring, SE, EX, EX-L, HF, LX, DX, and GX in 1.8L gas or CNG. To be sure it matches your car, compare the OE and Partslink numbers above against your owner's manual or the original hinge on your vehicle. The vehicle check tool and the part numbers on this page are there to help you identify the right part — they're a reference, not a fitment guarantee.

Do I need to modify anything to install these?

No. They bolt to the factory mounting points with your existing hardware.

Does it come with bolts?

Only the two hinges are included. Reuse your original mounting bolts unless they're rusted or damaged.

How long does installation take?

With basic hand tools and someone helping you hold the hood, most DIYers finish both sides in well under an hour.