AUXITO Y19 Series 9012/HIR2 LED Headlight Bulbs
AUXITO Y19 Series 9012/HIR2 LED Headlight Bulbs
2-Year Warranty with Pay with Ease
Choose your year, make, and model to browse products with exact fitment faster.
Currently Shopping For
Previously Saved
2-Year Warranty with Pay with Ease
AUXITO's Brightest 9012/HIR2 LED headlight bulb offers a remarkable upgrade to your vehicle's lighting system. These bulbs are 700% brighter than halogen bulbs with a total light output of 120W and 24000LM per set. They are designed with 12 highly bright CSP LED chips in each bulb, providing cool white 6500K light.
If the light output is important to you, then the Y19 series of 9012 LED bulbs are a great choice. With a 700% brighter output than halogen bulbs, it's preferred for off-road headlight lighting.
![]() |
![]() |
The beam pattern of the AUXITO 9012/HIR2 LED bulbs is the same as stock bulbs, with a clear cutoff line that won't blind incoming traffic. This is achieved by positioning the LED chips closer to the filament of the halogen bulb.
The triple heat transfer structure, including a whole aviation aluminum lamp body, 12,000RPM high-speed cooling fan, and double-sided copper board, ensures a 50,000-hour lifespan for the bulbs. They are also IP67 waterproof, making them suitable for use in bad weather.
![]() |
![]() |
Installation is a breeze, with a mini-size design and non-polarity socket that perfectly fits into the headlight housing and factory plug without any modification. The bulbs can be replaced on both sides in just 10 minutes.
AUXITO 9012 LED headlight bulbs are compatible with 99% of vehicle systems, thanks to their extra intelligent IC driver and high wattage close to stock bulbs. They are plug-and-play, and Canbus is ready and error-free.
These headlights improved not only the aesthetics of my car but the overall safety in driving at night! I drive dark country roads early in the mornings and these have helped me spot animals, road debris etc far ahead of me! 100% would buy again
Number 1: the bulb you sent me with the wire, the Y19, are extreme difficult to install due to the connector. Your procedures and the Toyota procedure has you re-install the dust and moisture cap back on to protect the internals of the light housing from debris. The problems with that is two fold. First, to install the dust cap back you have to tuck the connection inside the light housing and that in itself was painful and time consuming. Definitely not a plug and play. Number 2: the LED unit you sent produces a lot of heat! So much heat that AUXITO was smart enough to install a heat sink and a cooling fan. However, once you put the dust cap back on you’ve effectively turned the internals of the light housing into a convection oven, cooking the electrical system, reason why, I believe, the bulbs have failed on the first night used. The solution to that is two fold: leave the connector outside the housing for ease of connection hopping the wires don’t chafe and eventually fail, and leave the dust cap off for cooling.
Number 3: The gloves. Although a nice touch, once you put them on and start working, they snag on anything sharp making the installation of the bulb that much more difficult. A rugged, thick latex would make a better solution, or no gloves at all.
I had to reinstall the HIDs back so my wife and daughter can see while driving at night. I was in the car with her last night and you couldn’t see anything creating a potential hazardous condition if the rest of the low beam bulb on the passenger side failed. The bulbs literally lasted minutes on the first drive in the dark. That being said, if you choose to send me the same bulb again I’ll do what I wrote you above. If you choose the send the other model for the same car without the external wire, I’ll install that but I still won’t install the dust cap for the same reasons mentioned above; too much heat.
👍👍👍👍👍👍
Now i can see way more with this lights fit perfectly and as described i do recommend to buy i have them in all my vehicles.
Super bright but excellent spread as well. Just like old HID but so much brighter. Fantastic product
Upgraded for 2025 | 170W and 32000LM for extreme brightness and superior road illumination. Wide 9-30V Voltage Range | Ensures stable output and...
View full details⚡ 150W power and 24,000 LM for superior nighttime visibility. 📏 0.039-inch chip spacing achieves a perfect halogen-like beam pattern. ...
View full detailsThis is a fixed design, if you need an adjustable lock ring, please click on "same Q16 Series but adjustable lock ring". AUXITO New upgraded 901...
View full detailsAUXITO 9012/HIR2 Mini Sized LED Bulbs, Pack of 2 Mini Lamp Size: Almost 1:1 same size like halogen 9012/hir2 bulbs, non-polarity plugs, perfect...
View full detailsAUXITO 9012 LED Light Bulbs Wireless LED Light These bulbs are all-in-one designed, mini-sized, 15,000lm bright per set, plug and play, let you se...
View full detailsGet lighting tips, product launches & exclusive offers straight to your inbox.
Get lighting tips, product launches & exclusive offers straight to your inbox.
Follow us on social media to stay updated on the latest news and promotions.
AUXITO H11 H8 H9 H16 LED Fog Light Bulb Fanless, 3000k Golden Yellow 26W per set, CSP LED Chips
Extremely high quality as well as EXTREME BRIGHTNESS. Turn night darkness into DAYLIGHT!!! WORTH EVER DOLLAR. I swapped out 4 vehicles in my family to these LEDs. All owners are in disbelief on the brightness AND the increase in safety driving
These are amazing!! so bright. would definitely recommend
I got them for my impala 06 and they didn’t not fit as assured. Giving 4 because they are good lights but I will be returning due to not fitting.
I went to the website - easy to follow and put in your vehicle. Ordered the high beams. They were delivered quickly and worked perfectly.



