AUXITO Y19 Series 9005/HB3 H11/H9/H8 LED Headlight Bulbs Combo Conversion Kits

Name: AUXITO X-Plore 1 Series | 4.5" Auxiliary Driving Lights Spot/Driving Beam + Amber DRL
Brand: AUXITO
SKU: FZD-XP1-4_5INCH-SPOT-W2
Price: 329.0 USD
Availability: InStock

Image + Video

AUXITO Y19 Series 9005/HB3 H11/H9/H8 LED Headlight Bulbs Combo Conversion Kits

$199.98

2-Year Warranty with Pay with Ease

If you are unsure of your car bulb, click bulb finder to find it.
If you are sure your car bulb is 9005 for high beam and h11 for low beam, you can buy these products on this page.
What Will You Receive? -2X9005(HB3) + 2X H11(H8/H9) LED bulbs

Detail
Review

700% Brighter, Huge Upgrade

AUXITO H11 LED Bulbs & 9005/HB3 led bulbs designed with 24 pcs highly bright CSP chips, 120W, 24,000LM per pair, are 700% brighter than stock bulbs. 6500K cold white improves nighttime visibility and helps you see more clearly. A huge upgrade for halogen low-beam or high beam

360° No Blind Spots, Perfect Beam Pattern

The 0.03-inch ultra-thin base board makes AUXITO H11 LED Bulbs & 9005 LED bulbs closer to the light-emitting area of the halogen bulb, ensuring 360° lighting without black spots. No glare to oncoming vehicles and drivers. The light is more focused on the ground, providing you with a more comfortable and safer driving environment
[10 Mins Installation, Just a Simple Twist]: Almost 1:1 mini-sized design as halogen bulbs, no radio interference, and non-polarity socket, perfectly fit into the headlight housing and factory plug without any modification. Installation takes less than 10 minutes, just plug and play

50,000+hrs Lifespan, Multi-stage Cooling

AUXITO H11 LED Bulbs & 9005 HB3 LED bulbs are designed with full body aluminum material, double copper tube, and copper baseboard for fast cooling, built-in 12,000RPM high-speed silent cooling fan effectively pulls the heat away from the LED chips, ensuring a lifespan of up to 50,000 hours

99% Vehicles Compatible, Canbus Ready

Built-in intelligent IC driver and almost identical to the power of halogen bulb for optimized compatibility. Work well with 99% of vehicles’ systems. No Errors and no Flickering. But some sensitive models may require canbus decoders.

What is your vehicle's year, make and model : 2018 Jeep Grand Cherokee (w/ HIDs)

Great Lighting

Very bright LEDs they fit perfectly in my HID set up. Yes they are D3S LEDs.

What is your vehicle's year, make and model : 2020 Jeep Grand Cherokee Limited X

Amazing Upgrade!!

These headlights improved not only the aesthetics of my car but the overall safety in driving at night! I drive dark country roads early in the mornings and these have helped me spot animals, road debris etc far ahead of me! 100% would buy again

What is your vehicle's year, make and model : 2007 Toyota Solara SLE with HID

I expected more

Number 1: the bulb you sent me with the wire, the Y19, are extreme difficult to install due to the connector. Your procedures and the Toyota procedure has you re-install the dust and moisture cap back on to protect the internals of the light housing from debris. The problems with that is two fold. First, to install the dust cap back you have to tuck the connection inside the light housing and that in itself was painful and time consuming. Definitely not a plug and play. Number 2: the LED unit you sent produces a lot of heat! So much heat that AUXITO was smart enough to install a heat sink and a cooling fan. However, once you put the dust cap back on you’ve effectively turned the internals of the light housing into a convection oven, cooking the electrical system, reason why, I believe, the bulbs have failed on the first night used. The solution to that is two fold: leave the connector outside the housing for ease of connection hopping the wires don’t chafe and eventually fail, and leave the dust cap off for cooling.
Number 3: The gloves. Although a nice touch, once you put them on and start working, they snag on anything sharp making the installation of the bulb that much more difficult. A rugged, thick latex would make a better solution, or no gloves at all.
I had to reinstall the HIDs back so my wife and daughter can see while driving at night. I was in the car with her last night and you couldn’t see anything creating a potential hazardous condition if the rest of the low beam bulb on the passenger side failed. The bulbs literally lasted minutes on the first drive in the dark. That being said, if you choose to send me the same bulb again I’ll do what I wrote you above. If you choose the send the other model for the same car without the external wire, I’ll install that but I still won’t install the dust cap for the same reasons mentioned above; too much heat.