2019 Ford Ranger LED Headlight Bulbs Upgrade Forward Exterior Interior Lights

 High Beam: 

• Run on DC 12V-24V, 40W and 8,000lm per bulb, 6500k white,
• Same Beam Pattern Like Stock One: 0.079in ultra thin copper board for 360° illumination
• Mini Sized Lamp Body: These non-polarity 9005 headlight bulbs are sized to fit your housing perfectly and can be plugged directly into your original factory sockets
• Can-bus Ready Design: Upgraded driver with built-in intelligent IC and temperature control
• Efficient Cooling System: Whole aviation aluminum body and 12,000RPM cooling fan provide super cooling ability
  
  

Low Beam：

• Run on DC 12V-24V, 40W and 8,000lm per bulb, 6500k white
• Same beam pattern like stock one: 0.079in ultra thin copper board for 360° illumination
• Mini sized lamp body: No more modification on headlight housing or cover
• Can-bus ready design: Making h11 led bulbs error free for 99% of vehicles’ system, upgraded driver with built-in intelligent IC and temperature control
• Whole aviation aluminum body and 12,000RPM cooling fan

Fog Light:  

• Each bulb has 16pcs high power XBD led chips, 80W max capacity, operate at 7.8W, 6500K xenon white, 1800Lumens bright, much brighter than halogen bulbs. 360° full angle lighting with the HD projector ensures optimal visibility and better light penetration.
• 6063 Aircraft-grade aluminum mold ensures efficient heat, extends the service time to 20,000+hrs
• 12-24V wide voltage design, EMC electric circuit. Intelligent constant current IC, no radio interference
• The waterproof and dustproof design ensures the bulbs keep working under different circumstance

Front Turn Signal Light: 

• Dual color function: The switchback turn signal flashes 'amber-off-amber-off' instead of 'amber-white-amber-white', much easier to be seen. Fit for dual filament socket. They will light up with white color as the low-filament running light/parking light, and switch to bright amber any time when you hit the turn signal
• Plug and play. Compatible with both standard and ck socket.
• DC 9V to 18V wide-range voltage design, built-in constant current intelligent IC driver, no digital and VHF radio signal interference
• Each bulb is equipped with 16 pieces of high power 3030 LED chips. With projector lens design, providing 360 degree full angle illumination. 300% brighter than halogen bulb

Rear Turn Signal Light: 

• These 7440 LED bulbs are used as turn signal lights ONLY. (They are single function, just one mode: bright mode, no dim mode)
• Come with 26 pcs 3020 SMD LED chipsets, 2800LM, 2200K amber yellow, Voltage: DC 12-24V, Power: 21W/PC
• Built-in Load Resistor & IC Driver: CANBUS Error Free, non-polarity, compatible for both CK/SRCK and Standard socket
• Double Heat Dissipation

Back up Light 7440: 

• DC 12V 24V, Power:9.6w/pc, Current:800ma, Lumen:1400LM/bulb, 6000K Xenon White
• Each bulb has 102 pcs high power 4014 led chips, with HD projector, stronger light penetration
• 360 Degree lighting ensures optimal visibility, hollow inner body design better for heat dissipation
• (for US standard type socket only)

Brake Light Bulb 7443R:

• Color: Brilliant red. Power: 8.4W. Working Voltage: 9-18V.
• Each bulb has 14 pieces high performance 3030 SMD chipsets with projector lens design, providing 360 degree full angle illumination. 300% brighter than halogen bulb, assuring you will be seen more clearly from further away
• Non-polarity design: plug and play. Compatible with both CK/SRCK and standard socket.

License Plate Light: 

• Each AUXITO T10 LED bulb has 24 pcs high quality 3014 LED chips, 240 Lumens,6000K white and 2W output, low power consumption.
• 360-degree lighting angle and high light output.
• CAN-BUS error free, no extra decoder needed

Front Side Marker Light: 

• 12V, amber yellow, 2W/PC, 240LM/PC, 1 by 0.47 inches, 2g/PC.
• Low power consumption for longer lifespan
• Each bulb has twenty-four 3014 SMD on it, 360-degree lighting angle, no blind spot,super-bright brings your car a refreshed new look
  
  

NOTE:

• Some vehicles equipped with the CAN-BUS system may require additional load resistors to bypass the error code/flash issue
• Pls double check your owner manual to confirm the correct bulb size you need before purchasing