2-Year Warranty with Pay with Ease
If your vehicle's exterior lighting is all upgraded to white LED lights, and when you go to the back, you have two yellow dim bulbs that don't match the LED tail light bulbs on the truck. This is probably more OCD than anything else. Let’s be honest, the factory license plate light bulb from the factory leaves much to be desired, especially if you have still not taken the plunge and at least stepped up to an LED license plate light.
LED license plate light will provide an updated look to your exterior lighting while also illuminating your license plate better. What's more, is that the LED license plate light can also greatly help the reversing camera to be able to see the reversing image more clearly.
 |
 |
But many of you have probably noticed the issue with the license plate lamps Ford has chosen to use for our trucks: they shine a huge pattern of light up onto the tailgate which ultimately ends up washing out the reverse camera's picture when you really need it at night. While it does a good job of illuminating the plate, the pattern is poor. On top of that, the situation can get worse when you add bright aftermarket LED license plate light bulb.
Fortunately, AUXITO offers direct-fit replacement LED license plate lights for the 2015-2021 Ford F150, each consisting of 18 pcs SMDs chips and providing a reasonable amount of light illumination, improving license plate illumination while reducing the glare that occurs in the reverse image from the direct replacement of other bright LED license plate light bulbs.
For 2015-2021 Ford F-150 XL | XLT | SSV | Police Responder | Lariat| King Ranch | Platinum | Limited | Raptor
200% Brighter
Built-In High Power SMD LED Chips to Reasonably Rear End Illumination
Plug & Play
Simply Remove the Original T10 Bulbs & Connect The Plug.
 |
 |
Direct-Fit Replacement
Identical to OEM Specification. No Modification or Trimming is Needed.
Cool Smoked Lens
Reduces glare on the reverse image. Intended For Car Show or Off-Road Use Only
This is the part people usually dread the most. Don’t worry though, this led license plate light install is about as easy as it gets. On the AutoXperts scale of 1 - NOT FUN, this easily ranks at a 1. As a matter of fact, no tools are even required (although you could use a plastic trim removal tool if you would like).
Locate the single tab of the license plate light by simply reaching around to the underside of the vehicle bumper and feeling for the single tab of the factory housing. Once located, simply press in on the tab and push it up.
Now that the tab is released, use a finger to pry the housing toward you, completely removing the factory housing.
 |
 |
Remove the bulb socket from the factory housing by twisting the grey socket and pulling until it releases.
*The socket and housing are keyed and will only release and reinstall when aligned.
 |
 |
Remove the bulb from the bulb socket, connect the connector from the new housing to the bulb socket, and push the wire into the housing while reseating the bulb socket into the new housing.
 |
 |
Reseat the new housing back into the vehicle bumper, an audible “click” should be heard, letting you know it has been secured properly. Repeat the process on the other side. Enjoy the new upgraded look and brighter illumination to your license plate that these provide.
If you are more of a visual learner, pls check out @auto.x.perts video on the 2015-2020 Ford F150 license plate lights installation.
Want additional lighting options for your Ford F150? Click here for more on LED lighting upgrades for the 2004-2021 Ford F150!
Easy installation, and significantly enhanced the backup visibility of my F150.
The came really fast. It was a plug and play application. Very nice I would buy again
These install in under 5 minutes and are super bright! Both the housing and plug snap right in.
These lights were super easy to swap out the original ones for....just a matter of minutes and the difference is huge....Thanks.
All the other lights on my truck are led from the factory. The yellow, incandescent license plate light looked out of place and cheapened the over all look of the truck. Swapping to these led license plate lights unified the entire look of the truck and installation was as easy as it could get. I was also relieved to discover the lights didn’t create any added “washout” to the rear camera. You can find more on the installation, my impressions and the look in the video link attached.
Overview The Y13 Series mini-sized H11/H8/H9 LED headlight Bulb almost 1:1 same size as the halogen h11 headlight bulb, perfect fit for the 20...
View full details
Overview 2015-2024 F150 still use halogen bulbs as headlight high beams. Even though we know the new F150 projector headlight has curve-adapti...
View full details
Overview Each H10 LED fog light bulb can provide 2000lm of brightness and have a good cutoff / less scatter! Whether it's 3000K yellow light o...
View full details
Suitable for: 2015-2020 Ford F-150 2017-2021 Ford F-Series Super Duty F-250 | F-350 | F-450 2019-2021 Ford Ranger Regular Cab | Super Cab | Super...
View full details
Small and bright side mirror lights! The side mirror lights on the left and right sides are to let the car in your visual blind spot, the driver...
View full details
