LED License Plate Light

What are license plate bulbs called?

Tag lights, also known as license plate lights, allow other vehicles to see your license plate in the delse you may get pulled over.

Does every car need to have a license plate light?

Yes. License plate lights are important for several reasons. Firstly, they ensure your license plate is visible even in low-light conditions. Secondly, they are a legal requirement in most places, and driving without them can result in fines or other penalties.

Are license plate light bulbs universal?

License plate light bulbs are not universal; their size, type, and connector style can vary based on the vehicle's make and model.

Consider the following factors:
Bulb Type: Determine whether your vehicle uses incandescent, halogen, or LED bulbs.
Bulb Size: Different vehicles require different bulb sizes, such as T10, 168, 194, 921 for incandescent or halogen bulbs, and various sizes for LED bulbs.
Voltage: Ensure the replacement bulb matches your vehicle's voltage requirements.
Color Temperature (for LED bulbs): If you're switching from incandescent to LED, consider the color temperature for the desired appearance.

To find the right replacement, consult your vehicle's owner's manual, contact an automotive parts store or dealership, or search for your specific vehicle make and model online to determine the correct license plate light bulb specifications. This will help ensure compatibility and proper function.

What color is the license plate light?

License plate lights are usually white, but other colors are not strictly prohibited. The reason for using white lights and avoiding red and green lights is so that your license plate lights are not confused with emergency lights.

What are the penalties for not installing a license plate light?

1. Fines: In California, fines for failing to illuminate your license plate lights can vary, depending on the circumstances and the jurisdiction in which the violation occurred.
2. Points on your driving record: In some cases, violations that occur because your license plate lights are not working properly may result in points on your driving record.
3. Vehicle Impound: In certain circumstances, law enforcement may impound a vehicle without a license plate light feature
4. Repair Ticket: California law enforcement officers may issue a "repair ticket" for a car without a license plate light, which means the driver must fix the problem and show proof of repairs to a court or police station to clear the violation.

It is worth noting that the consequences of not installing a license plate light or having the license plate light not working are usually not as serious as other types of traffic violations (such as drunk driving, escape, etc.). However, it is still important to resolve the issue as soon as possible to avoid any fines or penalties and to ensure the safety of the driver and other vehicles and pedestrians on the road.

How do I change a license plate light bulb?

● Method 1: Replace the lamp from the outside
1. Get a new license plate light bulb that is compatible with your vehicle.
2. If your vehicle has screws on the light cover, loosen them.
3. If the lamp holder is fixed on the bumper, please rotate the lamp holder from below.
4. Pull the light straight out of the base to remove it.
5. Push the new bulb into the slot (wear cotton gloves when handling new bulbs).
6. Open the vehicle and check whether the lights are working properly.
7. Place the cover back on the bulb so that the screw holes line up. Turn the screwdriver clockwise to tighten the screw back onto the cover to secure it.

● Method 2: Access the light from inside the suitcase 1. Get a license plate light that is compatible with your vehicle.
2. Remove the plastic fasteners holding the top trunk liner in place.
3. Unscrew the base that holds the light bulb in the trunk.
4. Grasp the bulb with your fingers and pull it straight out of the base to remove it. (Do not attempt to twist or loosen the label lights as this may cause them to break.)
5. Push the new bulb into the slot (wear cotton gloves when handling new bulbs).
6. Before placing the base back into the vehicle, start the vehicle and turn on the headlights. The new bulb should light up immediately.
7. Screw the base back onto the vehicle.
8. Hold the trunk liner against the body so that the fastener holes line up with each other. Push the plastic fastener into the hole until it clicks into place.

Note: If you need to upgrade the license plate light assembly, please go to: License Plate Light Assemblies