AUXITO Y19 Series H11/H8/H9 LED Headlight Bulbs

Name: AUXITO X-Plore 1 Series | 4.5" Auxiliary Driving Lights Spot/Driving Beam + Amber DRL
Brand: AUXITO
SKU: FZD-XP1-4_5INCH-SPOT-W2
Price: 329.0 USD
Availability: InStock

Image + Video

AUXITO Y19 Series H11/H8/H9 LED Headlight Bulbs

$129.00

$99.99

2-Year Warranty with Pay with Ease

Detail
Review

AUXITO 2023 UPGRADED H11 LED HEADLIGHT BULBS

AUXITO's Brightest H11 LED headlight bulb offers a remarkable upgrade to your vehicle's lighting system. These bulbs are 700% brighter than halogen bulbs with a total light output of 120W and 24000LM per set. They are designed with 12 highly bright CSP LED chips in each bulb, providing cool white 6500K light.

If the light output is important to you, then the Y19 series of H11 LED bulbs are a great choice. With a 700% brighter output than halogen bulbs, it's preferred for off-road headlight lighting.

Install Brightest H11 LED Headlight Bulbs

FEATURES

No Blinding Oncoming Vehicles

The beam pattern of the AUXITO H11 LED bulbs is the same as stock bulbs, with a clear cutoff line that won't blind incoming traffic. This is achieved by positioning the LED chips closer to the filament of the halogen bulb.

50,000 Hours Lifespan

The triple heat transfer structure, including a whole aviation aluminum lamp body, 12,000RPM high-speed cooling fan, and double-sided copper board, ensures a 50,000-hour lifespan for the bulbs. They are also IP67 waterproof, making them suitable for use in bad weather.

10 Minutes Easy Installation

Installation is a breeze, with a mini-size design and non-polarity socket that perfectly fits into the headlight housing and factory plug without any modification. The bulbs can be replaced on both sides in just 10 minutes.

99% of Vehicles are Compatible

AUXITO H11 LED headlight bulbs are compatible with 99% of vehicle systems, thanks to their extra intelligent IC driver and high wattage close to stock bulbs. They are plug-and-play, and Canbus is ready and error-free.

Technical Specifications

Bulb Size

H11 H8 H9

Series

Y19 Series

Power

60w/bulb, 120w/pair

LED Type

CSP

Luminous Flux

12,000LM/bulb,
24,000LM/pair

Color Temperature

6500K

Lifespan

>50,000hrs

Package Includes

2X H11(H8) LED headlight bulbs

Hear From AUXITO Users

FROM THE AUXITO COMMUNITY #AUXITOLED

@Flywheel Films does an LED high beam and reverse light update for his Miata in this video! "I finally found some proper high beams that don’t give any error codes! Also switched my reverse lights and found that not all LED lights are made the same. Big thanks to AUXITO for shedding some light on my LED hopes and dreams."

FAQ

The package came with an Allen Wrench and I see where it can be used on the base. Is this to make adjustments to have the LED flange to be positioned upright in the housing?
The Allen wrench is included to allow rotational adjustment to optimize the beam pattern. Typically, optimization is directed toward adjusting the LEDs toward 3-9 o'clock

What is your vehicle's year, make and model : 2018 Jeep Grand Cherokee (w/ HIDs)

Great Lighting

Very bright LEDs they fit perfectly in my HID set up. Yes they are D3S LEDs.

What is your vehicle's year, make and model : 2020 Jeep Grand Cherokee Limited X

Amazing Upgrade!!

These headlights improved not only the aesthetics of my car but the overall safety in driving at night! I drive dark country roads early in the mornings and these have helped me spot animals, road debris etc far ahead of me! 100% would buy again

What is your vehicle's year, make and model : 2007 Toyota Solara SLE with HID

I expected more

Number 1: the bulb you sent me with the wire, the Y19, are extreme difficult to install due to the connector. Your procedures and the Toyota procedure has you re-install the dust and moisture cap back on to protect the internals of the light housing from debris. The problems with that is two fold. First, to install the dust cap back you have to tuck the connection inside the light housing and that in itself was painful and time consuming. Definitely not a plug and play. Number 2: the LED unit you sent produces a lot of heat! So much heat that AUXITO was smart enough to install a heat sink and a cooling fan. However, once you put the dust cap back on you’ve effectively turned the internals of the light housing into a convection oven, cooking the electrical system, reason why, I believe, the bulbs have failed on the first night used. The solution to that is two fold: leave the connector outside the housing for ease of connection hopping the wires don’t chafe and eventually fail, and leave the dust cap off for cooling.
Number 3: The gloves. Although a nice touch, once you put them on and start working, they snag on anything sharp making the installation of the bulb that much more difficult. A rugged, thick latex would make a better solution, or no gloves at all.
I had to reinstall the HIDs back so my wife and daughter can see while driving at night. I was in the car with her last night and you couldn’t see anything creating a potential hazardous condition if the rest of the low beam bulb on the passenger side failed. The bulbs literally lasted minutes on the first drive in the dark. That being said, if you choose to send me the same bulb again I’ll do what I wrote you above. If you choose the send the other model for the same car without the external wire, I’ll install that but I still won’t install the dust cap for the same reasons mentioned above; too much heat.