Non-polarity | applied to US standard and CK sockets.
7443 LED Bulb White, 7443 LED Bulb Red, 7443 LED Bulb Amber, 7443 Switchback LED Bub, 7440 LED Bulb Amber
Load resistor or flash relay might be needed
16K
14K
Do you have concerns about poor heat dissipation from LED turn signal light bulbs? Whenever your automotive needs a good upgrade for lighting...
View full details
Are you tired of amber as a constant DRL when the low beams are on, especially when your front lighting is all cool white LEDs, sorta ruining the ...
View full details
Once you've confirmed that your vehicle uses a 7443 bulb for turn signal light bulbs, side marker light bulbs, brake light bulbs, or reverse light bulbs, then you just need to consider what features you'd prefer in an LED bulb. AUXITO makes it easy for you to choose from a wide range of 7443 LED light bulbs in a variety of lumens, sizes, designs, and more. Check out our 7443 bulb selection guide to help you understand the AUXITO 7443 light bulb series!
The 4KP8/4KP10 series LED bulbs with built-in decoders can solve most of the decoding problems that occur while upgrading 7443 LED bulbs in most vehicles, even for sensitive cars. The 4KP10 can be used for turn signals and parking lights/DRLs when they are in one unit, while the 4KP8 can be used as a replacement for a 7440 bulb that has only a turn signal function.
The 7443 LED bulbs of the 2US6T series are designed to be more compact in size than their halogen counterparts, making them easy to install in assemblies where space is at a premium. The compact, double-sided LED chips emit a more uniform beam of light similar to halogen bulbs.
The 16K series of 7443 LED bulbs have a dual color feature, they will illuminate in white as a low filament running/parking light and switch to a bright amber color anytime you press the turn signal, making your vehicle more noticeable to oncoming drivers.
AUXITO's hottest option - The 54H series with the compact lens on the top can achieve a good spotlight effect, and reduce light scattering, while the 360° illumination design greatly enhances the visibility of exterior lights, and lets other drivers notice your intention to act.
The 102H series consists of 102 LED chips for high-brightness illumination along with 360 LED illumination and customized projectors to increase light output penetration for better illumination coverage.
Got this for my 2012 Wide glide,, to complete my LED conversions....
This bulb is the bomb,, & was easy to install,, plus did not mess with the elect. system ...
It is ''way'' bright,, & figure with this & the rest of the LED's now on the bike,, that the elect. system now ,, is pulling over 50% less,, & also way less draw on the Batt. ect.. ect..,, plus 50% less draw,, when starting the Bike,, as the lights are always on with the ignition ect.
Definite no brainer,, & you want to make sure that you keep the OEM headlight reflector cone in place,, when putting this on a later model Harley,, like the Dyna's ect.
Highly recommend & ''thank you'' !!
Ian
The length of time it took to receive the order seemed excessive. I was told the item was out of stock,but agreed to wait because I like the product. When notified the order was ready to ship, I was told you didn’t know what method to use for shipping. That seemed like a poor excuse since it looked like the order came
directly from the manufacturer. In the end,the bulbs arrived and were installed just in time for a very long road trip. Thank you for a good product.
Replaced my old chicken head knobs for my 2nd gen Tacoma. Install was so easy and it updated the look of my dash!
Una luz blanca brillantes me gustaron mucho
Www
