for Car Interior Dome Map Door Courtesy License Plate Lights,
14-SMD 2835 chipsets | 24-SMD 3014 chipsets
Finding it difficult to replace an extinguished OEM round bulb? Some owners are having tr...
View full details
What are T10 bulbs used for in cars?
T10 LED light bulbs could be used in cars or trucks dome lights, map lights, parking lights, door courtesy lights, license plate lights, trunk cargo lights, side marker lights, etc. But it depends on whether the factory settings of your vehicle model in these applications are T10-size bulbs. If unsure, go through AUXITO filters to purchase LED bulbs for the application you want to replace. Alternatively, use your vehicle's user manual to find out what bulbs your vehicle currently uses. Your bulb size should be listed under the "Vehicle Maintenance" or "Replacement Bulbs" section. From there, you can search online for LEDs with the same bulb size.
Can the brightness of these T10 LED bulbs be adjusted?
Sorry, these T10 LED bulbs are only designed to work in place of original halogen bulbs and do not have dimming function. If you are looking for the brightest T10 LED bulb option, I recommend you choose the 24H series T10 LED bulbs, 240LM/pc. The second brightest is the T10 LED bulb of the 14E series, 200LM/pc.
Can a T10 LED bulb replace a 194 size halogen bulb?
Yes, the T10 style of LED light can replace a 194 size bulb. Not only that, our T10 LED bulbs are also compatible with 168, 2825, 168, 161, 175, 174, W5W, and other models of OEM bulbs But please note that as long as that application uses a stock 194 halogen bulb from the factory, the T10 LED bulb would be a direct drop in replacement. If that location came from the factory with LED, it would not be compatible.
What color T10 LED lights should I choose for my vehicle's side marker lights?
In 1968, federal regulators imposed the requirement for side-marker lights—amber-colored ones for the front and red ones for the rear. We recommend that you choose an amber T10 LED bulb to upgrade the front side marker light, and a red T10 LED bulb to upgrade the rear side marker light. If your front marker lights have a yellow housing then you might also consider buying white T10 LED bulbs, the same for the rear.
Got this for my 2012 Wide glide,, to complete my LED conversions....
This bulb is the bomb,, & was easy to install,, plus did not mess with the elect. system ...
It is ''way'' bright,, & figure with this & the rest of the LED's now on the bike,, that the elect. system now ,, is pulling over 50% less,, & also way less draw on the Batt. ect.. ect..,, plus 50% less draw,, when starting the Bike,, as the lights are always on with the ignition ect.
Definite no brainer,, & you want to make sure that you keep the OEM headlight reflector cone in place,, when putting this on a later model Harley,, like the Dyna's ect.
Highly recommend & ''thank you'' !!
Ian
The length of time it took to receive the order seemed excessive. I was told the item was out of stock,but agreed to wait because I like the product. When notified the order was ready to ship, I was told you didn’t know what method to use for shipping. That seemed like a poor excuse since it looked like the order came
directly from the manufacturer. In the end,the bulbs arrived and were installed just in time for a very long road trip. Thank you for a good product.
Replaced my old chicken head knobs for my 2nd gen Tacoma. Install was so easy and it updated the look of my dash!
Una luz blanca brillantes me gustaron mucho
Www
