2005-2006 Acura RSX LED Bulbs Upgrade
2005-2006 Acura RSX LED Bulbs Upgrade
2-Year Warranty with Pay with Ease
2-Year Warranty with Pay with Ease
For you to drive your 2005-2006 Acura RSX in a safe and sane manner, you need proper visibility. The Whole kit comes with LED bulbs that vary in Lumen output for you to end up with just the right source of illumination to light up the road ahead of you.
Package Included:
High Beam: 9005 LED headlight Bulbs
Low Beam: H1 LED headlight Bulbs
Here is the installation video about the H1 LED headlight bulb, you can follow the video to install it. If you have any other questions, you can free feel to contact the customer service staff.
|
|
*The wiring adapters are included in the package for the H1 LED headlight bulb.
(you can finish replacing the H1 LED headlight bulb low beam in less than 10 minutes!)
1) Remove Battery Hold-Down Bolt from Radiator-support (Driver-Side) or lift Power-Steering Reservoir from its mounting Clip (Passenger-Side).
2) Move Battery or Reservoir toward motor to create room for your favorite hand.
3) Unplug Headlight Wire (Rectangular-Plug with two female-blade Sockets).
4) Remove Weather-Boot (~2.5” Dia Rubber cup with two Pull-Tabs).
5) Gently unhook Retainer-Clip Wire (Unhook and move Clip toward fender). Owner’s Manual has a good graphic to educate your fingers.
6) Rotate Blub from Headlight-Housing (Bulb + Socket with two male-blades).
7) Unplug Bulb from Bulb-Socket (Bulb with metal base one male-blade).
8) Check Bulb-Socket male-blades against female-sockets to make sure male-blades are not bent.
9) Obtain new AUXITO H1 LED Headlight Bulb (Do Not Touch Bulb-Glass with bare fingers. Skin-Oils become corrosive at bulb operating temperatures).
10) Plug new Bulb into Bulb-Socket. (Handle by Bulb-Socket Only)
11) Place new Bulb and Bulb-Socket back into Headlight-Housing.
12) Looking through front of Headlight-Housing lens, Rotate Bulb-Socket until two small holes in the metal base align with holes in Headlight Housing.
13) Re-Hook Retainer-Clip Wire across Bulb-Socket, securing it in the Headlight Housing.
14) Replace Weather Boot, seat it all the way onto the Headlight Housing.
15) Reattach Headlight Wire
16) Re-secure battery or Reservoir.
T15 Back-Up Light Bulbs:
7443 Brake/Tail Light Bulbs(2 piar):
For more videos on installing LED bulbs in the Acura RSX, click here
7443 Center High Mount Stop Light Bulbs:
7443 Front/Rear Turn Signal Light Bulbs:
|
|
T10 Front Side Marker Light Bulbs:
|
T10 Rear Side Marker Light Bulbs:
|
T10 License Plate/Trunk Light Bulbs:
|
31MM Map/Dome Light Bulbs:
|
If you need the other LED bulbs, please check the model user manual or contact us by mail at support@auxito.com
Looking for something else? Head to our homepage
Fast shipping, no problems, very happy with the the results
AUXITO customized the entire vehicle with an LED bulb upgrade kit for the 2002 2003 2004 Acura RSX. Here you will find high beam, low beam, fog l...
View full detailsGet lighting tips, product launches & exclusive offers straight to your inbox.
Get lighting tips, product launches & exclusive offers straight to your inbox.
Follow us on social media to stay updated on the latest news and promotions.
I was very impressed! My Can-Am uses 4 9005 headlights. 2 for the low beam & 2 for the high beam. Low’s are a noticeable improvement BUT when on high it’s almost like driving in daylight.
The LED bulbs are plug and play, work awesome my visibility is so much better and both the high and low beams work the way they should not like other bulbs that only worked on low beam.
The AUXITO J503 Jump Starter is a much needed complement to any vehicles safety kit. As one of the few jump starters with both safety protections and boost capability it is an industry leader. Unmatched protection for your vehicle.
Got this for my 2012 Wide glide,, to complete my LED conversions....
This bulb is the bomb,, & was easy to install,, plus did not mess with the elect. system ...
It is ''way'' bright,, & figure with this & the rest of the LED's now on the bike,, that the elect. system now ,, is pulling over 50% less,, & also way less draw on the Batt. ect.. ect..,, plus 50% less draw,, when starting the Bike,, as the lights are always on with the ignition ect.
Definite no brainer,, & you want to make sure that you keep the OEM headlight reflector cone in place,, when putting this on a later model Harley,, like the Dyna's ect.
Highly recommend & ''thank you'' !!
Ian
The length of time it took to receive the order seemed excessive. I was told the item was out of stock,but agreed to wait because I like the product. When notified the order was ready to ship, I was told you didn’t know what method to use for shipping. That seemed like a poor excuse since it looked like the order came
directly from the manufacturer. In the end,the bulbs arrived and were installed just in time for a very long road trip. Thank you for a good product.