Bulb size & fitment reference

Subaru Tribeca
Bulb Size Guide

Get the bulb-size answer first, then check factory-system differences and position-specific notes before buying.

Select Your Vehicle

Quick Answer for 2014 Subaru Tribeca

Start with the positions you’re most likely to replace. Full fitment details are below.

Headlight High Beam

Headlight Low Beam

H7 · Halogen Capsule

View this option →

Reverse Light

912 / 921 / T15

Shop this position →

Brake Light

Before You Buy: Factory Lighting Can Vary

Your vehicle may use different factory lighting systems. Check the applicable system before ordering.
Halogen bulb example

Halogen

Halogen bulbs are the standard factory bulbs and are easy to replace.

HID bulb and ballast example

HID

HID bulbs provide higher intensity light and require a ballast.

Full Bulb Fitment by Lighting Position

Find the bulb size for each lighting position and check any fitment notes before ordering.

Subaru Tribeca (2014) Bulb Size Chart

Lighting PositionBulb SizeNoteNext Step
Headlight High Beam9005 / HB3Shop position →
Headlight Low BeamD1SHIDShop position →
Headlight Low BeamH7Halogen CapsuleShop position →
Fog LightH3Shop position →
Front Turn Signal1157Shop position →
Parking Light1157Shop position →
Rear Turn Signal1156 / BA15SShop position →
Brake Light1157Shop position →
Outer Tail Light1157Shop position →
Inner Tail LightT10 / 194 / 168Shop position →
Upper Tail Light3157 / 3156Shop position →
Lower Tail LightT10 / 194 / 168Shop position →
Reverse Light912 / 921 / T15Shop position →
License Plate LightT10 / 194 / 168Shop position →
Front Side Marker LightT10 / 194 / 168Shop position →
Rear Side Marker Light1157Shop position →
Dome Light31MMShop position →
Map Light31MMShop position →
Stepwell LightT10 / 194 / 168Shop position →
Trunk Light912 / 921 / T15Shop position →
Luggage Compartment Light912 / 921 / T15Shop position →
View Fitment Options →
Fitment Reminder
Bulb size can vary by factory setup. If you're unsure which option applies to your vehicle, confirm your current bulb or select your configuration on the product page.