Select Your Vehicle 1   | Category 2   | Year 3   | Make 4   | Model 5   | Sub Model 6   | Body Type 7   | Location 8   | Qualifier
Didn't find your vehicle? Use the bulb finder system to get the bulb size.

AUXITO H3 Fog Light Daytime Running Light Bulbs

Dimensions mimic original halogen 1:1 design, AUXITO H3 LED bulbs are plug-and-play designed, super easy to install and can be upgraded in just a few minutes!

FILTERS

SERIES

COLOR

KEY ADVANTAGE

LUMEN/PAIR

POWER/PAIR

WATERPROOF

BULB SIZE

GF

1:1 Original Design
AUXITO H3 LED Fog Light Bulbs with 8 CSP chips 3000K Amber Yellow

AUXITO H3 LED Fog Light Bulbs with 8 CSP chips 3000K Amber Yellow

3000K Amber Yellow3600LM16W
$39.99

【CSP Chips, Brightness Improved】AUXITO h3 led bulb yellow is designed with 8 CSP chips, 3000k yellow, about 3 times brighter than stock h...

View full details
$39.99
1:1 Original Design
AUXITO H3 LED Fog Light Bulbs 6500K White

AUXITO H3 LED Fog Light Bulbs 6500K White with 8 CSP chips

6500K White3600LM16W
$39.99

Do You Know Why Need to Upgrade Halogen to LED?- Blurred vision on rainy and foggy days, narrow field of vision, low brightness of the original ha...

View full details
$39.99
You’re viewing 1-2 of 2 products

Shopping Info AUXITO H3 Fog Light Daytime Running Light Bulbs

What is the use of H3 light bulbs?

H3 bulbs are widely used in many European, Japanese and American-made vehicles, including Audi, Acura, Cadillac, etc, and are most commonly used as fog lights in cars. The H3 LED light bulb is a good replacement for halogen fog lights. Want to confirm if your vehicle is compatible with H3 bulbs? Please follow our Vehicle Finder Tool!

Is a H3 bulb dual beam?

No, H3 are single-beam bulbs that have only one filament and emit only one beam of light. They emit a constant, fixed beam pattern and are not equipped to switch between high and low beams.

How do you install an H3 LED bulb?

AUXITO H3 LED bulbs are plug-and-play designed, super easy to install and can be upgraded in just a few minutes! The following are two different H3 LED bulb installation steps without installing the decoder and installing the decoder:

1. Install the H3 LED bulb (without decoder)

  • First, unplug the wire connector and remove the dust cover;
  • Pry free the locking springs and remove the old bulb;
  • Insert and secure the H3 LED bulb and secure the locking springs;
  • Installation is completed by plugging the H3 LED bulb into the vehicle and connecting the OEM factory wiring harness.

2. Install H3 LED bulb (with decoder)

  • Unplug the wire connector and remove the dust cover;
  • Pry free the locking springs and remove the old bulb;
  • A crucial step: Connect the H3 LED bulb to the warning canceller/decoder;
  • Insert and secure the H3 LED bulb in the assembly;
  • Finally, plug the warning canceller into the vehicle's OEM factory wiring harness.

Below is the installation video of H3 LED of AUXITO GF series:

If you need to add a decoder to your H3 to prevent car lights from flickering, please follow the H3 Canbus Decoders/ Resistor!