These PY21W 7507 LED bulbs are replaced for the Standard BAU15S base interface, and the two contact pins are at a 150 degrees angle, replaced for BAU15S, 7507, PY21W, 2641A, 12496,7507AST, etc.
4KP8
5KG26
4KP8 Series CANBus Error Free LED Turn Signal Bulbs According to customer feedback, abnormal flashing and error codes occur when replacing the tu...
View full details
Why do you need LED turn signal bulbs with a built-in resistor function? When you want to upgrade your car's turn signals from yellowed, dim h...
View full details
Fix LED turn signal lights bulb fast hyper flash (blinking) or brake lights error code due to LED bulbs drawing much less current than stock lamps...
View full details
Once you've confirmed that your vehicle uses a 7507 bulb for turn signal light bulbs, side marker light bulbs, brake light bulbs, or reverse light bulbs, then you just need to consider what features you'd prefer in an LED bulb. AUXITO makes it easy for you to choose from a wide range of 7507 LED light bulbs in a variety of lumens, sizes, designs, and more. Check out our 7507 bulb selection guide to help you understand the AUXITO 7507 light bulb series!
The 4KP8 series LED bulbs with built-in decoders can solve most of the decoding problems that occur while upgrading 7507 LED bulbs in most vehicles, even for sensitive cars. Also, the top fan cooling to provide high brightness illumination is an advantage of this series.
Each 5KG26 series 7507 LED bulb features four banks of six high-power 3020 LEDs built into each side of the bulb assembly that work together to give you and your car massively increased levels of lighting output over stock. The diodes emit an amber-yellow-colored light to match your OEM lenses and generate a total of 2800 lumens per LED bulb.
The LED bulbs are plug and play, work awesome my visibility is so much better and both the high and low beams work the way they should not like other bulbs that only worked on low beam.
The AUXITO J503 Jump Starter is a much needed complement to any vehicles safety kit. As one of the few jump starters with both safety protections and boost capability it is an industry leader. Unmatched protection for your vehicle.
Got this for my 2012 Wide glide,, to complete my LED conversions....
This bulb is the bomb,, & was easy to install,, plus did not mess with the elect. system ...
It is ''way'' bright,, & figure with this & the rest of the LED's now on the bike,, that the elect. system now ,, is pulling over 50% less,, & also way less draw on the Batt. ect.. ect..,, plus 50% less draw,, when starting the Bike,, as the lights are always on with the ignition ect.
Definite no brainer,, & you want to make sure that you keep the OEM headlight reflector cone in place,, when putting this on a later model Harley,, like the Dyna's ect.
Highly recommend & ''thank you'' !!
Ian
The length of time it took to receive the order seemed excessive. I was told the item was out of stock,but agreed to wait because I like the product. When notified the order was ready to ship, I was told you didn’t know what method to use for shipping. That seemed like a poor excuse since it looked like the order came
directly from the manufacturer. In the end,the bulbs arrived and were installed just in time for a very long road trip. Thank you for a good product.
Replaced my old chicken head knobs for my 2nd gen Tacoma. Install was so easy and it updated the look of my dash!
