Select your vehicle 1   | Year 2   | Make 3   | Model 4   | Trim 5   | Location
Didn't find your vehicle? Use the bulb finder system to get the bulb size.

H11/H8/H9 Canbus Adapter Anti-Flicker Warning Canceler for LED Headlight

H11/H8/H9 Canbus Adapter Anti-Flicker Warning Canceler for LED Headlight

$24.99
Please choose Size:

H11/H8/H9 Canbus Adapter Anti-Flicker Warning Canceler for LED Headlight

Payments

Guaranteed safe & secure checkout

2 Years Warranty

Check other Canbus Decoders/ Resistor
✔ Since the original headlights‘ circuit is controlled by the car driving computer, the working principle and current of LED headlights are different from the original halogen lamps. The driving computer may not be able to detect the feedback signal of the LED headlights, which causes the dashboard to display error messages. Therefore, you must install the LED decoders to resolve all the fault alarms caused by modifying the LED headlights.

  • Detail
  • Review
✔ Canbus decoders can solve the following problems:1. Headlights failure message on the dashboard;2.High beam failure message on the dashboard;3.LED headlights hyper-flashing or flickering;4. The engine stops working when turning on the LED headlights;5. The LED Headlights stop working When the engine is ignited;6.LED headlights automatically turn off after lighting up for a few minutes.7.Radio interference and buzzes.
✔ EXCELLENT COMPATIBILITY: Fits for universal H11/H8/H9 led headlight/Fog-light bulbs. Compatible with Controller Area Network (CANBUS) systems or electrical system vehicles.Such as 2009+ Dodge, Ram, Ford, GMC Chrysler, Chevrolet, Hyundai, Kia, and More.
✔ PLUG-N-PLAY: Easy Installation. All-in-One Design. Plug and Play Setup for LED Headlight Conversion Kits. Average Installation time: 5-10 minutes;
✔ Worry-free guarantee: With our car decoder, it can solve 95% of the problems after installing led headlights. Please note: Different cars have different situations. We cannot guarantee a 100% effective solution to all problems.

 

Size: H11/H8/H9 Decoder


Since the original headlights‘ circuit is controlled by the car driving computer, the working principle and current of LED headlights are different from the original halogen lamps. The driving computer may not be able to detect the feedback signal of the LED headlights, which causes the dashboard to display error messages. Therefore, you must install the LED decoders to resolve all the fault alarms caused by modifying the LED headlights.

Canbus decoders can solve the following problems:

  • 1.Headlights failure message on the dashboard;
  • 2.High beam failure message on the dashboard;
  • 3.LED headlights hyper-flashing or flickering;
  • 4.The engine stops working when turning on the LED headlights;
  • 5.The LED Headlights stops working When the engine is ignited;
  • 6.LED headlights automatically turn off after lighting up for few minutes.
  • 7.Radio interference and buzzes.


Specification:

  • Working voltage: DC 9-16V
  • Power compensation: 6.5W-7.5W
  • Working temperature: -40 ° C ~ +125 ° C
  • Anti-reverse protection mode: input voltage positive isolation, output voltage negative sharing


Package Includes:

  • 2x H11/H8/H9 LED Headlights Canbus Decoders

Customer Reviews

Based on 18 reviews
78%
(14)
11%
(2)
6%
(1)
0%
(0)
6%
(1)
T
Tom Reno
What is your vehicle's year, make and model : 2008 BMW Z4
Install in 2008 BMW Z4

Car had base halogens. After installing the led high and low beams the telltale light would stay on until the high beams were cycled on. After they were cycled it would stay off until the next key on. After installing the canbus the light now goes out on its own after key on of the car.

N
Nuna Swan
What is your vehicle's year, make and model : 2012 f150
Works

Works great

K
Keith Farley
What is your vehicle's year, make and model : 2016 chevy silverado
Long shipping time

Good product but I almost ordered another because I had forgotten about I already ordered a set

Dear customer,
Thank you for your purchase and taking the time to write a product review.
I'm sorry that our products left you a bad impression.
Due to the severe global epidemic, the transportation and logistics of parcels have also been affected. The shipping time of the package will be longer than usual.
If it is checked that the package has not been received for a long time or the logistics track of the package has not been updated for a long time, please contact us in time for processing.
We will check whether the parcel track is in normal transportation and give you a definite answer.

J
JAIME GALVEZ
What is your vehicle's year, make and model : CAMARO 2014
NO ME SIRVIERON

COMPRE EL ARTICULO 7444R 48SMD FLASH LED LAMPS Y NO ME SIRVIERON LAS FREE LOAD RESISTORS LED DECODER, YA QUE SIGUE CON EL HYPER FLASH, QUE HAGO? SUGERENCIAS?

Dear customer,
Thank you for your purchase and taking the time to write a product review.
I'm sorry that our products left you a bad impression.
CAN-bus is a Controller Area Network Bus that allows the vehicle’s devices to communicate with each other. LED bulbs draw far less power than stock factory bulbs. The vehicle’s CAN bus system detects the low power draw and determines that the LED bulb is faulty or doesn’t recognize the bulb at all – resulting in the error or flickering.
If there are problems such as flickering or error reporting after use, you can contact us by email: support@auxito.com. We will try our best to solve it for you.
Sorry for the inconvenience and thank you for giving us the opportunity to rectify the matter.

S
Sal Delia
What is your vehicle's year, make and model : 2008 Ford Fusion SEL
H11 Resistor Canceller

I’ve tried like 10 different products to get this headlamp out message off my screen and this one actually works!
THANK YOU AUXITO I CAN FINALLY USE THE LEDS I got from you guys!

You recently viewed

Clear recently viewed