For 2014 2015 2016 2017 2018 2019 2020 Toyota 4Runner LED Headlight Bulbs
2 Years Warranty
30 day returns
Kindly remind, when the LED bulbs replace the high beam headlight, it may flicker or DRL flickers. Almost all LED bulbs have this problem on most 4Runner, so we don't recommend you to install the high beam with LEDs.
Compatible Vehicles: 2014, 2015, 2016, 2017, 2018, 2019, 2020 Toyota 4Runner
Solid alloy body and aluminum circuit board, ensure better heat dissipation and light transfer efficiency. Built-in stable constant current IC driver, 30,000+ longer lifespan for sure.
Replace for Turn Signal Lights, Side Marker Light, Corner Light, Parking Lights, etc.
▲A load resistor/flash relay might be needed to prevent the hyper flash when using as turn signal light.
It is for a separate turn signal and DRL or parking light. If your original turn signal bulb and parking light or DRL are in the same socket then this will fit, then you will need white/amber switchback.
These are great - I just installed them in my 3rd generation Toyota Tacoma and they're bright as heck. The press-fit into the Tacoma's stock rear light housing is really tight - I'm not worried about water intrusion one bit. I did use one of the supplied red o-rings, but I didn't spend much time deliberating between zero, one, or two o-rings per piece. I just don't think it will be a problem.The blade connector fits where a normal bulb would, and for that reason, I got some 1.5" shrink wrap with adhesive inside and a good heat gun. I installed the shrink wrap around the original housing and blade connector. Hopefully I won't have to cut it off for many years.I'm impressed with the quality of the aluminum heat sink - It actually looks better than a lot of the photos on here. Looking at the way it is constructed, I do believe that it is functional and will help the LEDs last longer. Seems like a great product!
Stop wasting time reading this and buy them.I have a 2003 Honda Element and it was super easy to install. For my vehicle they did not twist and lock in like the original light it was a push and stay in so I did have to use the o-rings they provided for a snug fit. They are stupid bright and make a huge difference. The only problem is now I just want to drive in reverse.
They are pretty bright. At first during install I was a little mad because I thought it didn't fit. But you just have to press them in pretty hard to push past the little rubber parts that clips it in. I put them in my 2015 4runner. I'm happy with them and the price. I can finally see better reversing at night because I have dark tint so this definitely helps.
Used these to replace oem reverse lights. I live on a long, unlit driveway with plants in both sides so it's extra dark and with tinted windows, I could not see out when reversing with the stock lights. These aftermarket LEDs are super bright, like mini headlights almost. See and be seen! Worth the cost and easy to install, although Honda's are maybe designed more for people with smaller hands than myself. Accessing the bulb location required some squeezing my hand through a small opening, but nothing I haven't encountered before. 10/10 would drive in reverse again